The Hornby Select

Downloads

• User Guide (1.5 MB)

LCD Display Guide

• Controls up to 10 trains simultaneously, provided the necessary power is available.
• The 1 amp power supply included allows for up to three locomotives (providing power is available) to be running at any one time.
• Supports a maximum four amp power supply (3 amps to the track, 1amp to the accessory outlet) available separately.
• Incorporates 128 speed steps for smooth control of locomotives.
• Can programme locomotives with up to 99 levels of acceleration / deceleration.
• The “Select” Unit supports up to nine functions per locomotive if required.
• Able to programme up to 59* locomotives or other items containing a locomotive decoder and 40 points or other items that rely on a solenoid for operation. Eg. Electrically operated signals, electrically operated uncouplers and point motors.
• It should be noted that items containing a locomotive decoder should always be programmed between† 1 - 59. This will ensure that the locomotive will function as expected. All items connected to Accessory Decoders should be programmed between 60 – 99.
• The “Select” accommodates decoders that incorporate a functioning feed back system.
• Supports XpressNet protocol.
• Uncontrolled 15V DC analogue accessory outlet.
• 2 digit LCD display
• External boosters can be supported through the XpressNet port. A standard RJ12 six-way cable can be used to connect the Select to a booster which has an RJ12 socket).
• Up to 9 “Select” units can be connected together for individual control of 9 locomotives providing power is available.
• The “Select” can be used as a Walkabout Unit when connected to the Hornby “Elite” Digital Unit.